Sfoglia per Autore
Polymer Solidification under Pressure and High Cooling Rates
2000-01-01 Brucato V.; La Carrubba V.; Piccarolo S.; Titomanlio G.
Isotactic polypropylene solidification under pressure and high cooling rates. A master curve approach
2000-01-01 La Carrubba V.; Brucato V.; Piccarolo S.
Influence of "Controlled Processing Conditions" on the solidification of iPP, PET and PA6
2002-01-01 La Carrubba V.; Brucato V.; Piccarolo S.
Phenomenological approach to compare the crystallization kinetics of isotactic polypropylene and polyamide-6 under pressure
2002-01-01 La Carrubba V.; Brucato V.; Piccarolo S.
An experimental methodology to study polymer crystallization under processing conditions. The influence of high cooling rates
2002-01-01 Brucato V.; Piccarolo S.; La Carrubba V.
Effect of pressure on the PVT behaviour of iPP as revealed by dilatometric measurements
2002-01-01 La Carrubba V.; Briatico-Vangosa F.; Brucato V.; Piccarolo S.
Orientation and crystallinity measurements in film casting products
2003-01-01 Lamberti G.; La Carrubba V.; Piccarolo S.; Brucato V.
Indentation test as a tool for monitoring the solidification process during injection molding
2003-01-01 La Carrubba V.; Gabrielse W.; Van Gurp M.; Piccarolo S.; Brucato V.
Solidification of sindiotactic polystyrene (sPS) under drastic conditions by Continuous Cooling Transformation (CCT)
2004-01-01 LA CARRUBBA V; IMPERIALE V; PICCAROLO S; BRUCATO V
Solidification of sindiotactic polystyrene (sPS) under drastic conditions by CCT
2004-01-01 LA CARRUBBA, V; IMPERIALE, V; PICCAROLO, S; BRUCATO, V
Solidification of sindiotactic polystyrene (sPS) under drastic conditions by CCT
2004-01-01 LA CARRUBBA, V; IMPERIALE, V; PICCAROLO, S; BRUCATO, V
Metastability and Post-forming behaviour of semi-crystalline polymers
2004-01-01 PICCAROLO S; V LA CARRUBBA
Studio della solidificazione durante lo stampaggio ad iniezione mediante un test di indentazione
2004-01-01 LA CARRUBBA V; GABRIELSE W; VAN GURP M; PICCAROLO S; BRUCATO V
Realizzazione ed impiego di Scaffold polimerici per le applicazioni dell’Ingegneria tessutale
2004-01-01 LA CARRUBBA V
Preparation and properties of poly(L-lactic acid) scaffolds by thermally induced phase separation from a ternary polymer-solvent system
2004-01-01 SHIRONG LI; LA CARRUBBA V; PICCAROLO S; SANNINO D; BRUCATO V
The use of master curves to describe the simultaneous effect of cooling rate and pressure on polymer crystallization
2004-01-01 LA CARRUBBA V; BRUCATO V; PICCAROLO S
Determination of the crystallization kinetics of a PBT/PET blend in relation to the behaviour of the constituents
2005-01-01 LA CARRUBBA V; STOCCO A; PICCAROLO S; BRUCATO V
Synthesis of a porous and biodegradable PLLA scaffold for application of tissue engineering
2005-01-01 CARFI' PAVIA F; LA CARRUBBA V; BRUCATO V; GERACI F; LUPARELLO C; SCONZO G
Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content
2005-01-01 LA CARRUBBA V; BULTERS M; STRUIJK G; ZOETELIEF W
Crystallization kinetics of a PBT/PET blend according to a Continuous Cooling Transformation (CCT) approach
2005-01-01 LA CARRUBBA V; STOCCO A; PICCAROLO S; BRUCATO V
Determination of the volumetric thermal expansion coefficient of glass fiber reinforced (GFR) thermoplastics through Pressure-Volume-Temperature (PVT) measurements
2005-01-01 LA CARRUBBA V; BULTERS M; STRUIJK G; ZOETELIEF W
The use of the indentation test for studying the solidification behaviour of different semicrystalline polymers during injection moulding
2005-01-01 LA CARRUBBA V; GABRIELSE W; PICCAROLO S
PLLA scaffolds for tissue engineering prepared via thermally induced phase separation
2006-01-01 LA CARRUBBA V; CARFI' PAVIA F; BRUCATO V; PICCAROLO S
Synthesis of PLLA scaffolds for tissue engineering via phase separation
2006-01-01 LA CARRUBBA V; CARFI' PAVIA F; BRUCATO V; PICCAROLO S
Effect of pressure and high cooling rates on the solidification behaviour of sindiotactic polystryrene (sPS)
2006-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
Crystallization behaviour of PBT-rich PBT/PET blends according to a Continuous Cooling Transformation (CCT) protocol
2006-01-01 LA CARRUBBA V; D'UGO V; BRUCATO V; PICCAROLO S
Solidification of Syndiotactic Polistyrene (sPS) under Pressure and High Cooling Rate
2006-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
A6 stem cells culture into a biodegradable PLLA scaffold
2006-01-01 CARFI PAVIA F; BRUCATO V; LA CARRUBBA V; GERACI F; SCONZO G
Injection moulding of thin and thick iPP parts in epoxy resin and steel moulds: a comparative study on properties development
2006-01-01 CAVALHEIRO AZ; LUZIO A; TRANCHIDA D; LA CARRUBBA V; SALMORIA GV; AHRENS CH; PICCAROLO S
Una Metodologia Sperimentale per lo Studio della Cristallizzazione dei Polimeri in Condizioni di Processo. L'Influenza della Velocità di Raffreddamento
2006-01-01 LA CARRUBBA, V.; Brucato, V.; Piccarolo, S.
Metastability and post-forming behaviour of semi-crystalline polymers
2006-01-01 VINCENZO LA CARRUBBA; PICCAROLO S
SOLIDIFICATION BEHAVIOUR OF PBT/PET BLENDS UNDER PROCESSING CONDITIONS
2007-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
Comparison of thin-wall injection moulding of isotactic polypropylene in standard steel tool and rapid epoxy tooling
2007-01-01 CAVALHEIRO AZ; LA CARRUBBA V; PICCAROLO S; SALMORIA GV; AHRENS CH
Process-morphology relationships on injection moulding of isotactic polypropylene in standard steel tool and rapid epoxy tooling
2007-01-01 CAVALHEIRO AZ; LA CARRUBBA V; PICCAROLO S; S SALMORIA; GV; AHRENS CH
Solidification of syndiotactic polystyrene by a continuous cooling transformation approach
2007-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
Crystallization Kinetics of iPP: Influence of Operating Conditions and Molecular Parameters
2007-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
Polymeric scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of structure and morphology
2007-01-01 CARFI' PAVIA F; LA CARRUBBA V; BRUCATO V; PICCAROLO S
Analysis of the crystallization behaviour of PBT-rich PBT/PET blends under processing conditions
2007-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
The use of Diffusion Induced Phase Separation (DIPS) technique for the preparation of biodegradable scaffolds for angiogenesis
2008-01-01 La Carrubba, V; Carfì Pavia, F; Brucato, V; Piccarolo, S; Ghersi, G
CRYSTALLIZATION OF PBT/PET BLENDS UNDER LOW AND HIGH COOLING RATES: THERMODYNAMICS AND KINETICS CONSIDERATIONS
2008-01-01 LA CARRUBBA V; PICCAROLO S; BRUCATO V
Blending PLLA with PLA so as to tune the biodegradabilty of polymeric scaffolds for soft tissue engineering
2008-01-01 La Carrubba, V; Carfì Pavia, F; Brucato, V; Piccarolo, S
Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content
2008-01-01 LA CARRUBBA V; BULTERS M; ZOETELIEF W
Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology
2008-01-01 Carfì Pavia, F; La Carrubba, V; Piccarolo, S; Brucato, V
PLLA biodegradable scaffolds for angiogenesis via Diffusion Induced Phase Separation (DIPS)
2008-01-01 LA CARRUBBA, V.; CARFI' PAVIA, F.; Brucato, V.; Piccarolo, S.; Ghersi, G.
PLLA/PLA scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of properties and biodegradability
2008-01-01 La Carrubba, V; Carfì Pavia, F; Brucato, V; Piccarolo, S
GENERATION OF PREVASCULARIZED PLLA BIODEGRADABLE SCAFFOLDS BY DIP DRAWING AND DIFFUSION INDUCED PHASE SEPARATION (DIPS).
2009-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, VM; Ghersi, G
Membrane Distillation for a solar powered desalination pilot unit
2009-01-01 Ben Farh, M; Brucato, VMB; Cipollina, A.; La Carrubba,V; Mannella, GA; Micale, GDM
Thermal expansion of Glass fibre reinforced (GRF) thermoplastics: influence of the nature of the polymer matrix and of the fibre content
2009-01-01 La Carrubba, V; Bulters, M; Zoetelief, W
Procedimento di preparazione di scaffolds polimerici preangiogenizzati.
2009-01-01 Brucato, V; La Carrubba, V; Ghersi, G; Carfì Pavia, F
PLLA scaffolds based on thermally induced phase separation: morphology, cell seeding and proliferation
2009-01-01 Carfi' Pavia, F; La Carrubba, V; Brucato, V
PLLA biodegradable scaffolds for Vascular Tissue Engineering (VTE) applications via dip drawing and Diffusion Induced Phase Separation (DIPS)
2009-01-01 Carfi' Pavia, F; La Carrubba, V; Brucato, V; Ghersi, G
The concept and the application of no-flow temperature (NFT) in simulation of injection moulding
2009-01-01 Mannella, GA; La Carrubba, V; Brucato, VM; Zoetelief, W; Haagh, G
Comparison of the solidification of a commercial PBT-PET blend with the behaviour of the constituents
2009-01-01 La Carrubba, V; Brucato, VMB
Patent number RM2009A000073: Procedimento di preparazione di scaffold polimerici preangiogenizzati
2009-01-01 BRUCATO, V; LA CARRUBBA, V; GHERSI, G; CARFÌ PAVIA, F
PROCEDIMENTO DI PREPARAZIONE DI SCAFFOLD POLIMERICI PREANGIOGENIZZATI
2009-01-01 Brucato, VMB; La Carrubba, V; Ghersi, G; Carfì Pavia, F
The Solidification Behavior of a PBT/PET Blend Over a Wide Range of Cooling Rate
2009-01-01 Stocco, A; La Carrubba, V; Piccarolo, S; Brucato, VMB
The continuous cooling transformation (CCT) as a flexible tool to investigate polymer crystallization under processing conditions
2009-01-01 Brucato, VM; Kiflie Woldemariam, Z; La Carrubba, V; Piccarolo, S
Tuning of biodegradation rate of PLLA scaffolds via blending with PLA
2009-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, VMB
Tailoring PLLA scaffolds for tissue engineering applications: Morphologies for 2D and 3D cell cultures
2009-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, VM; Ghersi, G
Porous PLLA scaffolds are optimal substrates for internal colonization by A6 mesoangioblasts and immunocytochemical analyses
2009-01-01 Carfì Pavia, F; Turturici, G; Geraci, F; Brucato, VM; La Carrubba, V; Luparello, C; Sconzo, G
Demixing time and temperature influence on porosity and interconnection of PLLA scaffolds prepared via TIPS
2009-01-01 BRUCATO, VMB; CARFI' PAVIA, F; LA CARRUBBA, V
A composite PLLA scaffold for regeneration of complex tissues.
2010-01-01 Carfì Pavia, F; La Carrubba V; Ghersi, G; Brucato, VMB
Pre-vascularized PLLA scaffolds: A new approcah to develop deep tissue regeneration
2010-01-01 Brucato, V.; CARFI' PAVIA, F.; LA CARRUBBA, V.; Ghersi, G.; Rigogliuso, S.; Conte, F.
Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino
2010-01-01 Calvo, S; Luzzu, F; Scannavino, A; Montagnino, FM; Paredes, F; Brucato, VM; La Mantia, FP; La Carrubba, V
Patent number PA2010 A 000023: Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino
2010-01-01 Calvo, S; Luzzu, F; Scannavino, A; Montagnino, F; Paredes, F; Brucato, V; La Mantia, FP; LA CARRUBBA, V; La Mantia, F.
On the calculation of free energy of mixing for aqueous polymer solutions with group-contribution models
2010-01-01 Mannella, GA; La Carrubba, V; Brucato, VMB
CHARACTERIZATION OF HYDROPHOBIC POLYMERIC MEMBRANES FOR MEMBRANE DISTILLATION PROCESS
2010-01-01 Mannella, GA; La Carrubba, V; Brucato, VMB
TUBULAR SCAFFOLD FOR VASCULAR TISSUE ENGINEERING APPLICATION
2010-01-01 LA CARRUBBA, V.; CARFI' PAVIA, F.; Brucato, V.
Water Fluxes in Polymeric Membranes for Desalination via Membrane Distillation
2010-01-01 Mannella, GA; Brucato, VMB; La Carrubba, V
A COMPOSITE PLLA SCAFFOLD FOR REGENERATION OF COMPLEX TISSUES
2010-01-01 Carfi' Pavia, F; La Carrubba, V; Ghersi, G; Brucato, VMB
Polyactide Biodegradable Scaffolds for Tissue Engineering Applications: Phase Separation-Based Techniques
2011-01-01 La Carrubba, V; Carfì Pavia, F; Ghersi, G; Brucato, V
Structure and Morphology Control in Polymer Forming Through the Thermal History
2011-01-01 La Carrubba, V; Brucato, V
Theoretical Predictions and experimental determination of cloud point curves for polymeric solutions: an application to the ternary system Poly-lactic-acid (PLLA)-dioxane-water
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, V
A survey on models for the prediction of phase equilibria in polymer solutions
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, V
A study via simulation of solidification during injection molding
2011-01-01 Mannella, G; La Carrubba, V; Brucato, V; Zoetelief, W; Haagh, G
PLA/PLLA scaffold for vascular tissue engineering applications
2011-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, V
Characterization of commercial polymeric membranes for membrane distillation processes
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, V
Solidification during the filling stage of injection molding: a simulation-oriented study
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, V
PHEA‐PLLA: A New Polymer Blend For Tissue Engineering Applications
2011-01-01 Carfì Pavia, F; La Carrubba, V; Palumbo, F; Giammona, G; Brucato, V
Polylactide biodegradable scaffolds for tissue engineering applications phase separation-based techniques
2011-01-01 La Carrubba V.; Carfi Pavia F.; Ghersi G.; Brucato V.
Lattice fluid model generalized for specific interactions: An application to ternary polymer solutions
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, VMB; Sanchez, IC
Some Features of Polymeric Membranes for Water Purification via Membrane Distillation
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, VM
No-flow temperature and solidification in injection molding simulation
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, V; Zoetelief, W; Haagh, G
No-Flow Temperature in Injection Molding Simulation
2011-01-01 Mannella, GA; La Carrubba, V; Brucato, VM; Zoetelief, W; Haagh, G
Calculation of ternary polymer solution phase diagram via compressible lattice fluid model extended to specific interactions
2012-01-01 Mannella, GA; La Carrubba, V; Brucato, V; Sanchez, IC
PREPARATION AND HYDROLYTIC DEGRADATION OF POLY LACTIC ACID BASED SCAFFOLDS
2012-01-01 Carfì Pavia, F; LA CARRUBBA, V; Brucato, V
Il concetto di "no-flow temperature" e il problema della solidificazione in flusso durante lo stadio di riempimento nel processo di stampaggio ad iniezione
2012-01-01 Brucato, V; Mannella, G; La Carrubba, V
CLOUD POINT MEASUREMENTS IN MEMBRANE FORMING SYSTEMS
2012-01-01 Mannella, GA; La Carrubba, V; Brucato, V
Solidification of Polypropylene Under Processing Conditions – Relevance of Cooling Rate, Pressure and Molecular Parameters
2012-01-01 La Carrubba, V; Brucato, V
Evaluation of vapor mass transfer in various membrane distillation configurations: an experimental study
2012-01-01 Mannella, GA; La Carrubba, V; Brucato, V
Poly lactic acid based scaffolds as graft for small-diameter arterial replacement.
2012-01-01 BRUCATO, VM; CARFI PAVIA, F; RIGOGLIUSO, S; LA CARRUBBA, V; GHERSI, G
Poly lactic acid based foams prepared via Thermally Induced Phase Separation (TIPS): a method to tune the crystallinity.
2012-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, V
Use of Modified 3D Scaffolds to Improve Cell Adhesion and Drive Desired Cell Responses.
2012-01-01 Rigogliuso, S; Carfì Pavia, F; Brucato, VMB; La Carrubba, V; Favia, P; Intranuovo, F; Gristina, R; Ghersi, G
Poly lactic acid based scaffolds for vascular tissue engineering
2012-01-01 Carfì Pavia, F; Rigogliuso, S; La Carrubba, V; Mannella, G; Ghersi, G; Brucato, V
Modeling and experimental approaches for the characterization of phase equilibria in polymer solutions
2012-01-01 Mannella, GA; La Carrubba, V; Brucato, V
Morphology and thermal properties of foams prepared via thermally induced phase separation based on polylactic acid blends
2012-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, V
Composites poly-lactic acid - hydroxyapatite scaffolds prepared via Thermally Induced Phase Separation
2013-01-01 Carfì Pavia, F; La Carrubba, V; Brucato, V
PLLA-fibrin scaffolds for Vascular Tissue Engineering
2013-01-01 Carfì Pavia, F; Rigogliuso, S; La Carrubba, V; Ghersi, G; Brucato, V
Tissue engineered vascular grafts based on poly-lactic acid blends
2013-01-01 Brucato, V; Carfì pavia, F; Rigogliuso, S; La Carrubba, V; Ghersi,G
Temperature influence on the morphology of porous structures prepared via Thermally Induced Phase Separation (TIPS)
2013-01-01 Mannella, GA; Carfì Pavia, F; La Carrubba, V; Brucato, V
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile