Within the European Fusion Technology Programme, the Helium-Cooled Lithium Lead (HCLL) breeding blanket concept is one of the two EU lines to be developed for a Long Term fusion reactor, in particular with the aim of manufacturing a Test Blanket Module (TBM) to be implemented in ITER. The HCLL-TBMis foreseen to be located in an ITER equatorial port, being housed inside a steel-supporting frame, actively cooled by pressurized water. That supporting frame has been designed to house two different TBMs, providing two cavities separated by a dividing Plate 20 cm thick. As the nuclear response of HCLL-TBM might vary accordingly to the supporting frame configuration and composition, at the Department of Nuclear Engineering of the University of Palermo, a parametric study has been launched to investigate such an influence. Previous works dealt with the dependence of the nuclear response of HCLL-TBM on the configuration of a homogeneous frame, the present one has been focused on the investigation of the potential influence of coolant distribution within the frame on the radiation-induced damage of the HCLL-TBM structural material. To this purpose, a detailed parametric study of the HCLL-TBM nuclear response has been performed by means of 3D-Monte Carlo neutronic analyses to asses both the rates of displacements per atom and helium and hydrogen production within the structural material. A semi-heterogeneous model of the supporting frame, assuming a realistic coolant distribution, and a 3D heterogeneous model of the HCLL-TBM, taking into account EUROFER as structural material, has been set-up. Therefore, the models of the TBM and of its frame have been inserted into the existing 3D ITER one, simulating realistically the reactor lay-out up to the cryostat and providing for a proper D-T neutron source. The analyses have been performed by means of theMCNP-4C code, and the results obtained are reported and critically discussed.
CHIOVARO, P., DI MAIO, P.A., OLIVERI, E., VELLA, G. (2008). A study of the potential influence of frame coolant distribution on the radiation-induced damage of HCLL-TBM structural material. FUSION ENGINEERING AND DESIGN, 83(7-9), 1273-1276 [10.1016/j.fusengdes.2008.08.022].
A study of the potential influence of frame coolant distribution on the radiation-induced damage of HCLL-TBM structural material
CHIOVARO, Pierluigi
;DI MAIO, Pietro Alessandro;OLIVERI, E;VELLA, G.
2008-01-01
Abstract
Within the European Fusion Technology Programme, the Helium-Cooled Lithium Lead (HCLL) breeding blanket concept is one of the two EU lines to be developed for a Long Term fusion reactor, in particular with the aim of manufacturing a Test Blanket Module (TBM) to be implemented in ITER. The HCLL-TBMis foreseen to be located in an ITER equatorial port, being housed inside a steel-supporting frame, actively cooled by pressurized water. That supporting frame has been designed to house two different TBMs, providing two cavities separated by a dividing Plate 20 cm thick. As the nuclear response of HCLL-TBM might vary accordingly to the supporting frame configuration and composition, at the Department of Nuclear Engineering of the University of Palermo, a parametric study has been launched to investigate such an influence. Previous works dealt with the dependence of the nuclear response of HCLL-TBM on the configuration of a homogeneous frame, the present one has been focused on the investigation of the potential influence of coolant distribution within the frame on the radiation-induced damage of the HCLL-TBM structural material. To this purpose, a detailed parametric study of the HCLL-TBM nuclear response has been performed by means of 3D-Monte Carlo neutronic analyses to asses both the rates of displacements per atom and helium and hydrogen production within the structural material. A semi-heterogeneous model of the supporting frame, assuming a realistic coolant distribution, and a 3D heterogeneous model of the HCLL-TBM, taking into account EUROFER as structural material, has been set-up. Therefore, the models of the TBM and of its frame have been inserted into the existing 3D ITER one, simulating realistically the reactor lay-out up to the cryostat and providing for a proper D-T neutron source. The analyses have been performed by means of theMCNP-4C code, and the results obtained are reported and critically discussed.File | Dimensione | Formato | |
---|---|---|---|
A study.pdf
Solo gestori archvio
Dimensione
419.63 kB
Formato
Adobe PDF
|
419.63 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.