Macro-mesoporous TiO2inverse opal materials were synthesized and they were tested as photocatalysts under visible light irradiation. The influence of cerium oxide addition towards the Rhodamine B (RhB) photodegradation activity was evaluated. Structural, textural, spectral and surface properties of the TiO2-CeO2inverse opal nanocomposites were studied by XRD, XPS, SEM, TEM, N2adsorption-desorption, Diffuse Reflectance UV–vis and Photoluminescence spectroscopies. Compared to commercial TiO2anatase, the macro-mesoporous TiO2inverse opal exhibited six times higher kinetic rate constant in the RhB degradation under visible light irradiation. The good photocatalytic activity was related to the peculiar structure of this material, providing higher active surface area and enhancement of the mass transfer phenomena due to a very significant porosity. A positive effect of ceria addition was observed in terms of increased photocatalytic activity (73% of RhB degradation after 120 min of irradiation) when the amount of the CeO2was low (up to 3% wt). Moreover the TiO2-3%CeO2exhibited the lowest photoluminescence band intensity among all samples, indicating that the best efficiency in the charge carriers separation occurs in this catalyst. The presence of Ce3+species was favoured for small amounts of cerium oxide, resulting in a positive effect on the photoactivity. The mutual interaction between Ti and Ce metal cations promotes an easier charge transfer on the surface, accelerating in particular the Ce4+/Ce3+redox process that is beneficial for the oxidation reactions. On the contrary the use of high amounts of cerium oxide (>5% wt) led to a progressive agglomeration of CeO2, thus increasing the crystal size of TiO2-CeO2particles (from 27 to 33 nm) and favouring the coverage of TiO2active sites. This work reports the preparation and some photoactivity tests of some visible light responsive nanomaterials for an efficient solar energy utilization.

Fiorenza, R., Bellardita, M., Barakat, T., Scirè, S., Palmisano, L. (2018). Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2inverse opals. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY. A, CHEMISTRY, 352, 25-34 [10.1016/j.jphotochem.2017.10.052].

Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2inverse opals

Bellardita, Marianna;Palmisano, Leonardo
2018-01-01

Abstract

Macro-mesoporous TiO2inverse opal materials were synthesized and they were tested as photocatalysts under visible light irradiation. The influence of cerium oxide addition towards the Rhodamine B (RhB) photodegradation activity was evaluated. Structural, textural, spectral and surface properties of the TiO2-CeO2inverse opal nanocomposites were studied by XRD, XPS, SEM, TEM, N2adsorption-desorption, Diffuse Reflectance UV–vis and Photoluminescence spectroscopies. Compared to commercial TiO2anatase, the macro-mesoporous TiO2inverse opal exhibited six times higher kinetic rate constant in the RhB degradation under visible light irradiation. The good photocatalytic activity was related to the peculiar structure of this material, providing higher active surface area and enhancement of the mass transfer phenomena due to a very significant porosity. A positive effect of ceria addition was observed in terms of increased photocatalytic activity (73% of RhB degradation after 120 min of irradiation) when the amount of the CeO2was low (up to 3% wt). Moreover the TiO2-3%CeO2exhibited the lowest photoluminescence band intensity among all samples, indicating that the best efficiency in the charge carriers separation occurs in this catalyst. The presence of Ce3+species was favoured for small amounts of cerium oxide, resulting in a positive effect on the photoactivity. The mutual interaction between Ti and Ce metal cations promotes an easier charge transfer on the surface, accelerating in particular the Ce4+/Ce3+redox process that is beneficial for the oxidation reactions. On the contrary the use of high amounts of cerium oxide (>5% wt) led to a progressive agglomeration of CeO2, thus increasing the crystal size of TiO2-CeO2particles (from 27 to 33 nm) and favouring the coverage of TiO2active sites. This work reports the preparation and some photoactivity tests of some visible light responsive nanomaterials for an efficient solar energy utilization.
2018
Settore CHIM/07 - Fondamenti Chimici Delle Tecnologie
http://www.elsevier.com/locate/jphotochem
Fiorenza, R., Bellardita, M., Barakat, T., Scirè, S., Palmisano, L. (2018). Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2inverse opals. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY. A, CHEMISTRY, 352, 25-34 [10.1016/j.jphotochem.2017.10.052].
File in questo prodotto:
File Dimensione Formato  
[37]JPhotochemPhotobilA_I.O.TiO2-CeO2.pdf

Solo gestori archvio

Dimensione 3.1 MB
Formato Adobe PDF
3.1 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10447/294447
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 58
  • ???jsp.display-item.citation.isi??? 57
social impact