The effects of water uptake on the fracture toughness of epoxy systems with high glass-transition temperatures (Tgabove 170 °C) are investigated. Aging conditioning has been conducted in hot water, followed by a desorption conditioning in a room temperature dry-airborne. Water aging determines plasticisation effects and crosslink-density modifications, revealed by reductions of the Tg. It is less known how such modifications influence the material fracture toughness. In this study, Single Edge Notched Bending samples have been tested according to standards, to evaluate the KICfracture toughness at different stages of water absorption-desorption. The characterisation has been supported by Photoelastic Stress Analysis, allowing to evaluate stresses induced by swelling during aging. Results indicate that swelling stresses activate a crack closure mechanism that might contribute to the observed increase of the measured fracture toughness during water absorption, but are ineffective at saturation. Two epoxy systems, one based on DGEBA and the other on DGEBF, having different cross-link densities, have been studied. The plasticisation achieved at saturation translated into a significant increase of fracture toughness only in DGEBA, while fracture toughness measured at other conditioning stages was likely influenced by internal swelling stresses and sample pre-cracking strategy.
Pitarresi, G., Toscano, A., Alessi, S. (2018). Fracture toughness of synthesised high-performance epoxies subject to accelerated water aging. POLYMER TESTING, 68, 248-260 [10.1016/j.polymertesting.2018.04.010].
Fracture toughness of synthesised high-performance epoxies subject to accelerated water aging
Pitarresi, Giuseppe;Toscano, Andrea;Alessi, Sabina
2018-01-01
Abstract
The effects of water uptake on the fracture toughness of epoxy systems with high glass-transition temperatures (Tgabove 170 °C) are investigated. Aging conditioning has been conducted in hot water, followed by a desorption conditioning in a room temperature dry-airborne. Water aging determines plasticisation effects and crosslink-density modifications, revealed by reductions of the Tg. It is less known how such modifications influence the material fracture toughness. In this study, Single Edge Notched Bending samples have been tested according to standards, to evaluate the KICfracture toughness at different stages of water absorption-desorption. The characterisation has been supported by Photoelastic Stress Analysis, allowing to evaluate stresses induced by swelling during aging. Results indicate that swelling stresses activate a crack closure mechanism that might contribute to the observed increase of the measured fracture toughness during water absorption, but are ineffective at saturation. Two epoxy systems, one based on DGEBA and the other on DGEBF, having different cross-link densities, have been studied. The plasticisation achieved at saturation translated into a significant increase of fracture toughness only in DGEBA, while fracture toughness measured at other conditioning stages was likely influenced by internal swelling stresses and sample pre-cracking strategy.File | Dimensione | Formato | |
---|---|---|---|
Fracture toughness of synthesised high-performance epoxies subject to..._Polymer testing (2018).pdf
Solo gestori archvio
Dimensione
3.27 MB
Formato
Adobe PDF
|
3.27 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.