The measurement of voltage characteristics in power systems requires the accurate estimation of the power supply frequency and signal synchronization, even in the presence of disturbances. The authors developed and tested two innovative techniques for instrument synchronization. The first is based on signal spectral analysis techniques performed by means of the Chirp-Z transform analysis. The second is a phase-locked loop (PLL) software based on a time-domain coordinate transformation and an innovative phase-detection technique. To evaluate how synchronization techniques are adversely affected by the application of a disturbing influence, experimental tests were carried out, taking into account the requirements of the standards. The proposed techniques were compared with a standard hardware solution. In this paper, the proposed techniques are described, the experimental results are presented, and the accuracy specifications are discussed.

Aiello, M., Cataliotti, A., Cosentino, V., & Nuccio, S. (2007). Synchronization techniques for power quality instruments. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, Vol. 56, NO 5, 1511-1519 [10.1109/TIM.2007.903585].

Synchronization techniques for power quality instruments

CATALIOTTI, Antonio;COSENTINO, Valentina;NUCCIO, Salvatore
2007

Abstract

The measurement of voltage characteristics in power systems requires the accurate estimation of the power supply frequency and signal synchronization, even in the presence of disturbances. The authors developed and tested two innovative techniques for instrument synchronization. The first is based on signal spectral analysis techniques performed by means of the Chirp-Z transform analysis. The second is a phase-locked loop (PLL) software based on a time-domain coordinate transformation and an innovative phase-detection technique. To evaluate how synchronization techniques are adversely affected by the application of a disturbing influence, experimental tests were carried out, taking into account the requirements of the standards. The proposed techniques were compared with a standard hardware solution. In this paper, the proposed techniques are described, the experimental results are presented, and the accuracy specifications are discussed.
Settore ING-INF/07 - Misure Elettriche E Elettroniche
http://ieeexplore.ieee.org/document/4303373/
Aiello, M., Cataliotti, A., Cosentino, V., & Nuccio, S. (2007). Synchronization techniques for power quality instruments. IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, Vol. 56, NO 5, 1511-1519 [10.1109/TIM.2007.903585].
File in questo prodotto:
File Dimensione Formato  
TIM07_Synchronization Techniques for Power Quality Instruments.pdf

Solo gestori archvio

Descrizione: Articolo
Dimensione 503.57 kB
Formato Adobe PDF
503.57 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: http://hdl.handle.net/10447/20829
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 65
  • ???jsp.display-item.citation.isi??? 54
social impact