In the present paper, the flexural and the shear resistance of high strength reinforced concrete (HSC) beams with longitudinal bars, in the presence of transverse stirrups is analyzed both theoretically and experimentally. The experimental researches here presented are parts of previous researches carried out by the author. Researches refer to HSC beams with high percentages of steel bars failing in shear and in flexure. From the analytical point of view, a model based on the evaluation of the resistance contribution due to beam and arch actions including bond splitting and concrete crushing failure modes is developed and presented. The model was verified against available experimental results and those recently obtained by the author. Some of the more recent analytical expressions able to predict the shear and the flexural resistance of concrete beams were mentioned and design considerations are made referring to a ductile design of HSC beams. Finally, design recommendations were derived with the proposed model and compared with expressions given in most common codes.
Campione, G., Monaco, A., Minafò, G. (2014). Shear strength of High-strength concrete beams: modeling and design recommendations. ENGINEERING STRUCTURES, 69(69), 116-122 [DOI: 10.1016/j.engstruct.2014.02.029].
Shear strength of High-strength concrete beams: modeling and design recommendations
CAMPIONE, Giuseppe;MONACO, Alessia;MINAFO', Giovanni
2014-01-01
Abstract
In the present paper, the flexural and the shear resistance of high strength reinforced concrete (HSC) beams with longitudinal bars, in the presence of transverse stirrups is analyzed both theoretically and experimentally. The experimental researches here presented are parts of previous researches carried out by the author. Researches refer to HSC beams with high percentages of steel bars failing in shear and in flexure. From the analytical point of view, a model based on the evaluation of the resistance contribution due to beam and arch actions including bond splitting and concrete crushing failure modes is developed and presented. The model was verified against available experimental results and those recently obtained by the author. Some of the more recent analytical expressions able to predict the shear and the flexural resistance of concrete beams were mentioned and design considerations are made referring to a ductile design of HSC beams. Finally, design recommendations were derived with the proposed model and compared with expressions given in most common codes.File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S0141029614001229-main.pdf
Solo gestori archvio
Descrizione: articolo principale
Dimensione
1.03 MB
Formato
Adobe PDF
|
1.03 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.