Ni nanowires (NWs) of different lengths were fabricated by pulsed potentiostatic deposition within pores of polycarbonate membranes. After template dissolution, substrates underwent sequential Spray-ILGAR® depositions of thin indium sulphide films. The effect of deposition temperature was also investigated. For low number of deposition cycles, results showed complete and uniform covering of metal over the entire length of NWs, with formation of Ni - In2S3 core-shell structures. However, with increasing number of deposition cycles films became uneven and crusty, especially at higher temperatures, owing to the simultaneous formation of nickel sulfide. This drawback was almost eliminated doubling the duration of the spray step.

Piazza, S., Genduso, G., Inguanta, R., Sunseri, C., LuxSteiner, M., Fischer, C.H. (2013). Nickel-Indium Sulphide Core-Shell Nonostructures Obtained by Spray-ILGAR Deposition. In J.J.K. Sauro Pierucci (a cura di), CHEMICAL ENGINEERING TRANSACTIONS (pp. 2239-2244). AIDIC [10.3303/CET1332374].

Nickel-Indium Sulphide Core-Shell Nonostructures Obtained by Spray-ILGAR Deposition

PIAZZA, Salvatore;INGUANTA, Rosalinda;SUNSERI, Carmelo;
2013-01-01

Abstract

Ni nanowires (NWs) of different lengths were fabricated by pulsed potentiostatic deposition within pores of polycarbonate membranes. After template dissolution, substrates underwent sequential Spray-ILGAR® depositions of thin indium sulphide films. The effect of deposition temperature was also investigated. For low number of deposition cycles, results showed complete and uniform covering of metal over the entire length of NWs, with formation of Ni - In2S3 core-shell structures. However, with increasing number of deposition cycles films became uneven and crusty, especially at higher temperatures, owing to the simultaneous formation of nickel sulfide. This drawback was almost eliminated doubling the duration of the spray step.
2013
Settore ING-IND/23 - Chimica Fisica Applicata
Piazza, S., Genduso, G., Inguanta, R., Sunseri, C., LuxSteiner, M., Fischer, C.H. (2013). Nickel-Indium Sulphide Core-Shell Nonostructures Obtained by Spray-ILGAR Deposition. In J.J.K. Sauro Pierucci (a cura di), CHEMICAL ENGINEERING TRANSACTIONS (pp. 2239-2244). AIDIC [10.3303/CET1332374].
File in questo prodotto:
File Dimensione Formato  
Ni-InS-CET2013.pdf

Solo gestori archvio

Dimensione 1.11 MB
Formato Adobe PDF
1.11 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10447/89866
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 7
social impact