Crossflow turbines represent a valuable choice for energy recovery in aqueducts, due to their constructive simplicity and good efficiency under variable head jump conditions. Several experimental and numerical studies concerning the optimal design of crossflow hydraulic turbines have already been proposed, but all of them assume that structural safety is fully compatible with the sought after geometry. We show first, with reference to a specific study case, that the geometry of the most efficient impeller would lead shortly, using blades with a traditional circular profile made with standard material, to their mechanical failure. A methodology for fully coupled fluid dynamic and mechanical optimization of the blade cross-section is then proposed. The methodology assumes a linear variation of the curvature of the blade external surface, along with an iterative use of two-dimensional (2D) computational fluid dynamic (CFD) and 3D structural finite element method (FEM) simulations. The proposed methodology was applied to the design of a power recovery system (PRS) turbine already installed in an operating water transport network and was finally validated with a fully 3D CFD simulation coupled with a 3D FEM structural analysis of the entire impeller.

Sinagra, M., Picone, C., Arico', C., Pantano, A., Tucciarelli, T., Hannachi, M., et al. (2021). Impeller optimization in crossflow hydraulic turbines. WATER, 13(3) [10.3390/w13030313].

Impeller optimization in crossflow hydraulic turbines

Sinagra, M.;Picone, C.;Arico', C.
;
Pantano, A.;Tucciarelli, T.;
2021-01-01

Abstract

Crossflow turbines represent a valuable choice for energy recovery in aqueducts, due to their constructive simplicity and good efficiency under variable head jump conditions. Several experimental and numerical studies concerning the optimal design of crossflow hydraulic turbines have already been proposed, but all of them assume that structural safety is fully compatible with the sought after geometry. We show first, with reference to a specific study case, that the geometry of the most efficient impeller would lead shortly, using blades with a traditional circular profile made with standard material, to their mechanical failure. A methodology for fully coupled fluid dynamic and mechanical optimization of the blade cross-section is then proposed. The methodology assumes a linear variation of the curvature of the blade external surface, along with an iterative use of two-dimensional (2D) computational fluid dynamic (CFD) and 3D structural finite element method (FEM) simulations. The proposed methodology was applied to the design of a power recovery system (PRS) turbine already installed in an operating water transport network and was finally validated with a fully 3D CFD simulation coupled with a 3D FEM structural analysis of the entire impeller.
2021
Settore ICAR/01 - Idraulica
Sinagra, M., Picone, C., Arico', C., Pantano, A., Tucciarelli, T., Hannachi, M., et al. (2021). Impeller optimization in crossflow hydraulic turbines. WATER, 13(3) [10.3390/w13030313].
File in questo prodotto:
File Dimensione Formato  
Impeller-optimization-in-crossflow-hydraulic-turbines2021Water-SwitzerlandOpen-Access.pdf

accesso aperto

Tipologia: Versione Editoriale
Dimensione 9.23 MB
Formato Adobe PDF
9.23 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10447/486320
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 11
  • ???jsp.display-item.citation.isi??? 11
social impact