In In the last years there has been an increasing use of digital techniques for conservation and restoration purposes. Among these, a very dominant rule is played by the use of digital photogrammetry packages (Agisoft Photoscan, 3D Zephir) which allow to obtain in few steps 3D textured models of real objects. Combined with digital documentation technologies digital fabrication technologies can be employed in a variety of ways to assist in heritage documentation, conservation and dissemination. This paper will give to practitioners an overview on the state of the art available technologies and a feasible workflow for optimizing point cloud and polygon mesh datasets for the purpose of fabrication using 3D printing. The goal is to give an important contribute to confer an automation aspect at the whole processing. We tried to individuate a workflow that should be applicable to several types of cases apart from small precautions. In our experimentation we used a DELTA WASP 2040 printer with PLA easyfil.

Inzerillo, L., Di Paola, F. (2017). FROM SFM TO 3D PRINT: AUTOMATED WORKFLOW ADDRESSED TO PRACTITIONER AIMED AT THE CONSERVATION AND RESTAURATION. INTERNATIONAL ARCHIVES OF THE PHOTOGRAMMETRY, REMOTE SENSING AND SPATIAL INFORMATION SCIENCES, 42(2W5), 375-382 [10.5194/isprs-archives-XLII-2-W5-375-2017].

FROM SFM TO 3D PRINT: AUTOMATED WORKFLOW ADDRESSED TO PRACTITIONER AIMED AT THE CONSERVATION AND RESTAURATION

INZERILLO, Laura
;
DI PAOLA, Francesco
2017-01-01

Abstract

In In the last years there has been an increasing use of digital techniques for conservation and restoration purposes. Among these, a very dominant rule is played by the use of digital photogrammetry packages (Agisoft Photoscan, 3D Zephir) which allow to obtain in few steps 3D textured models of real objects. Combined with digital documentation technologies digital fabrication technologies can be employed in a variety of ways to assist in heritage documentation, conservation and dissemination. This paper will give to practitioners an overview on the state of the art available technologies and a feasible workflow for optimizing point cloud and polygon mesh datasets for the purpose of fabrication using 3D printing. The goal is to give an important contribute to confer an automation aspect at the whole processing. We tried to individuate a workflow that should be applicable to several types of cases apart from small precautions. In our experimentation we used a DELTA WASP 2040 printer with PLA easyfil.
2017
Settore ICAR/17 - Disegno
Inzerillo, L., Di Paola, F. (2017). FROM SFM TO 3D PRINT: AUTOMATED WORKFLOW ADDRESSED TO PRACTITIONER AIMED AT THE CONSERVATION AND RESTAURATION. INTERNATIONAL ARCHIVES OF THE PHOTOGRAMMETRY, REMOTE SENSING AND SPATIAL INFORMATION SCIENCES, 42(2W5), 375-382 [10.5194/isprs-archives-XLII-2-W5-375-2017].
File in questo prodotto:
File Dimensione Formato  
isprs-archives-XLII-2-W5-375-2017.pdf

accesso aperto

Tipologia: Versione Editoriale
Dimensione 2.09 MB
Formato Adobe PDF
2.09 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10447/238743
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 11
  • ???jsp.display-item.citation.isi??? 9
social impact