Sfoglia per Autore
Shear strength formula for interior beam-column joints with plain bars in existing buildings
2023-10-15 Di Marco C.; Frappa G.; Sabba M.F.; Campione G.; Pauletta M.
Flexural Behavior for External Beam–Column SFRC Joints: Experimental Investigation and Design Suggestions
2023-10-07 Campione, G., Cannella, F., Ferrotto, M.
Simplified method for determining the moment-rotation curve in eco-sustainable wind tower foundations
2023-04-15 Campione, Giuseppe
Degraded Gerber Saddles in RC Bridges
2023-04-01 Campione G.; Granata M.F.; Papia M.; Zizzo M.
Simplified calculation model for offshore wind tower founded on monopile member
2023-01-01 CAMPIONE,G
Influence of strands corrosion on the flexural behavior of prestressed concrete beams
2022-11-01 Campione, G., Zizzo, M.
Robustness Requirements for the Design of Plane Frames
2022-08-01 Campione, G.
Retrofit of External Beam-Column Concrete Joints with Diagonally Crossed Reinforcement: Experimental and Analytical Investigations
2022-02-01 Campione, G.
Effect of progressive collapse of central column on the push-down response of two-span beam-column substructures
2021-12-01 Campione, G.
Practical calculus methods for flexural response of shallow beam foundation
2021-07-01 Campione, G., Cannella, F., Zizzo, M.
Failure load and collapse mode of an RC beam in a large collapsed roof
2021-04-30 Campione, G.; Papia, M.
Analytical model for flexural and shear strength of normal and high-strength concrete beams
2021-04-25 Campione, G.
Buckling strength of steel tube for lifting telescopic wind steel tower
2021-03-01 Campione, G., Cannella, F., Zizzo, M., Pauletta, M.
Simple equations for strength and deformability verification of tubular steel wind turbine towers
2021-02-01 Campione, G.
Seismic behavior of exterior RC beam-column joints without code-specified ties in the joint core
2021-02-01 Pauletta, M., Di Marco, C., Frappa, G., Campione, G., Russo, G.
Simplified Model of PC Concrete Beams with Corroded Strands in Highway Viaduct: Case Study and Analytical Modeling
2021-01-01 Campione, G.
Structural Behavior of Telescopic Steel Pipe for a Full-Scale 60 kW Wind Turbine Tower
2020-04-01 Giuseppe Campione; Francesco Cannella; Maurizio Papia
Flexural response of rc beams failing in shear
2020-01-01 Campione, Giuseppe ; Ferrotto, Marco Filippo; Papia, Maurizio
Influence of design mistakes and material degradation on the collapse of a long-span RC roof in South Italy
2020-01-01 Campione G.; Giambanco G.
Analysis of a Collapsed Long-Span Reinforced Concrete Roof in South Italy: Design Mistakes and Material Degradation
2020-01-01 Campione G.; Giambanco G.
Flexural Test on a Full-Scale 60-kW Wind Turbine-Tower Telescopic Steel Pipe
2019-01-01 Campione G.; Monaco A.; Cannella F.
Effects of Air Tightness Tests on Steel Thin-Wall Box Structures with Circular and Rectangular Cross Sections
2019-01-01 Campione G.
Risk of failure in existing RC balcony and strength verification under degradation phenomena
2019-01-01 Campione G.; Cannella F.
Bond characterization of monolithic and layered glass panels and ultrasonic tests to control glued surfaces
2019-01-01 Campione, Giuseppe; Orlando, Francesco; Fileccia, Giuseppe; Pauletta, Margherita
Shear design of high strength concrete beams in MRFs
2019-01-01 Campione G.; Cucchiara C.; Monaco A.
Assessment of the load carrying capacity of reinforced concrete columns strengthened by steel cages Specificità nella valutazione della capacità portante di colonne in calcestruzzo armato rinforzate con incamiciatura in acciaio
2018-01-01 G. Campione, F. Cannella, L. Cavaleri, M.F. Ferrotto, M. Papia
Flexural behavior of hybrid glass beams with rectangular cross-sections
2018-01-01 Campione, Giuseppe*; Cannella, Francesco; Cavaleri, Liborio
Shear-to-Moment Interaction in Glass Beams with Open Cross Sections
2018-01-01 Campione, Giuseppe*; Cannella, Francesco; Scibilia, Nunzio
Analytical Prediction of the Flexural Response of External RC Joints with Smooth Rebars
2018-01-01 campione g.; cannella f.; cavaleri l.; la mendola l.; monaco a.
Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars
2018-01-01 Campione, G.*; Cannella, F.; Ferrotto, M.F.; Gianquinto, M.
Simplified analytical model for flexural response of external R.C. frames with smooth rebars
2018-01-01 Campione, Giuseppe*; Cannella, Francesco; Cavaleri, Liborio; Monaco, Alessia
Practical Model for Load-Carrying Capacity of Eccentrically Loaded Square Column Footings
2018-01-01 Campione G.
Moment-Axial Domain of Corroded R.C. Columns
2018-01-01 Campione G.; Cannella F.; Cavaleri L.; Ferrotto M.F.; Papia M.
Flexural behavior of corroded RC beams
2018-01-01 Campione, Giuseppe; Cannella, Francesco; Colajanni, Piero; Papia, Maurizio
Engineering failure analysis of corroded R.C. beams in flexure and shear
2018-01-01 Campione, G.; Cannella, F.
Structural behaviour of hybrid glass beams with T cross-sections
2018-01-01 Campione, Giuseppe*; Cannella, Francesco
Flexural Behavior of Glass Beams with T and i Shape Cross Sections
2017-09-01 Campione G.
Palo telescopico per produzione eolica con ridotto impatto ambientale
2017-01-01 Pantano, A.; Tucciarelli, T.; Montinaro, N.; Mancino, A.; Campione, G.
Analytical and Numerical Methods for the Evaluation of Critical Conditions in Longitudinal Bars of RC Columns
2017-01-01 Minafò, G.; Campione, G.
Testing of “Global Young's Modulus E” on a rehabilitated masonry bell tower in Venice
2017-01-01 Bergamo O.; Campione G.; Russo G.
Shear and flexural strength prediction of corroded R.C. beams
2017-01-01 Campione, G.; Cannella, F.; Cavaleri, L.
Simplified model for compressive response of RC column footing with square cross-section
2017-01-01 Campione G.; Cannella F.; Cucchiara C.
Moment-axial force domain of corroded R.C. columns
2017-01-01 Campione, G.; Cannella, F.; Cavaleri, L.; Ferrotto, M.
Practical Calculation Models for Column Footing and Comparison with Experimental Data
2017-01-01 Campione, G.; Cannella, F.; Cavaleri, L.
Frictional effects in structural behavior of no-end-connected steel-jacketed RC columns: Experimental results and new approaches to model numerical and analytical response
2017-01-01 Campione, G.; Cavaleri, L.; Di Trapani, F.; Ferrotto, M.
Brick masonry columns externally wrapped with steel wires under concentric and eccentric loads
2017-01-01 Campione, G.; Cavaleri, L.; Papia, M.
Shear and flexural strength of corroded R.C. beams
2016-01-01 Campione, G; Cannella, F; Cavaleri, L; Di Trapani, F; Minafò, G
Efficiency of stress-strain models of confined concrete with and without steel jacketing to reproduce experimental results
2016-01-01 Campione, G.; Cavaleri, L.; Ferrotto, M.; Macaluso, G.; Papia, M.
Use of FRP fabrics and stainless steel grids for strengthening brick masonry columns
2016-01-01 Campione, G.; Cavaleri, L.; La Mendola, L.; Papia, M.
Biaxial deformation and ductility domains for engineered rectangular RC cross-sections: A parametric study highlighting the positive roles of axial load, geometry and materials
2016-01-01 Campione, G.; Cavaleri, L.; Di Trapani, F.; Macaluso, G.; Scaduto, G.
Structural behavior of the old masonry bridge in the Gulf of Castellammare
2016-01-01 Bergamo, O; Campione, G; Cucchiara C.; Russo, G.
Analytical evaluation of steel–concrete composite trussed beam shear capacity
2016-01-01 Campione, G.; Colajanni, P.; Monaco, A.
Flexural behavior of external beam-column reinforced concrete assemblages externally strengthened with steel cages
2016-01-01 Campione, G.; Cavaleri, L.; Failla, A.
Simplified analytical model for moment–axial force domain in the presence of shear in R.C. members externally strengthened with steel cages
2016-01-01 Campione, G.; Monaco, A.; Papia, M.
Stainless steel grids for confinement of clay brick masonry columns
2016-01-01 Campione, G.; Cavaleri, L.; Papia, M.
Advanced Strategies and Materials for Reinforcing Normal and Disturbed Regions in Brick Masonry Columns
2016-01-01 Campione, G.; Cavaleri, L.; Papia, M.
Evaluation of infilled frames: an updated in-plane-stiffness macro-model considering the effects of vertical loads
2015-12-11 Campione, G.; Cavaleri, L.; Macaluso, G.; Amato, G.; Di Trapani, F.
Case Study of the Structural Behavior of a Catalan Bricks Masonry Vault
2015-01-01 Campione, G.; Benfratello, S.; Palizzolo, L.
Influenza dei Fenomeni Attritivi nella Risposta Strutturale di Colonne in c.a. Rinforzate con Incamiciatura in Acciaio: Confronto numerico-sperimentale e Predizione Analitica della Capacità
2015-01-01 Campione, G; Cavaleri, L; Di Trapani, F; Ferrotto, M F; Macaluso, Giuseppe; Papia, M
Modelling steel jacketed RC columns: Remarks by experimental-numerical comparisons
2015-01-01 Campione, G; Cavaleri, L.; Di Trapani, F; Ferrotto, MF; Macaluso, G; Papia, M;
A simple model for the calculation of the axial load-carrying capacity of corroded RC columns
2015-01-01 Campione, G.; Cannella, F.; Minafò, G.
In-situ NDT testing procedure as an integral part of failure analysis of historical masonry arch bridges
2015-01-01 Bergamo, O.; Campione, G.; Donadello, S.; Russo, G.
Hand verification for flexural strength of existing R.C. floors subject to degradation phenomena
2015-01-01 Campione, G.; Cannella, F.; Cavaleri, L.
Evaluation of infilled frames: an updated in-plane-stiffness macro-model considering the effects of vertical loads
2015-01-01 Campione, G.; Cavaleri, L.; Macaluso, G.; Amato, G.; Di Trapani, F.
Behavior in compression of concrete cylinders externally wrapped with basalt fibers
2015-01-01 Campione, G; La Mendola, L; Monaco, A; Valenza, A; Fiore, V
Analytical prediction of load deflection curves of external steel fibers R/C beam-column joints under monotonic loading
2015-01-01 Campione, G.
Flexural response of external R.C. beam-column joints externally strengthened with steel cages
2015-01-01 Campione, G.; Cavaleri, L.; Papia, M.
COMPRESSIVE BEHAVIOR OF LAMINATED GLASS COLUMNS
2014-01-01 Campione, G; Cavaleri, L; Minafò, G; Scibilia, N
Coperture in vetro stratificato: criteri di progettazione
2014-01-01 Campione, G; De Vecchi, A; Scibilia, N; Pollaci, C
Load Carrying Capacity of Glass Columns with Rectangular, T and X Transverse Cross-sections
2014-01-01 campione, g; cucchiara, c; rondello, v
Flexural and Shear Resistance of High Strength Concrete Beams
2014-01-01 Campione, G; Cucchiara, C; Monaco, A.
Temporary Strengthening Technique of Marble Columns with Steel Wires and Wood Spars
2014-01-01 campione, g; minafo, g; cucchiara, c
Compressive behaviour of laminated glass columns with T cross-sections
2014-01-01 Campione, G; Cavaleri, L; Minafò, G.
A case study of the structural behavior of a catalan bricks masonry vault
2014-01-01 Benfratello S; Campione G; Palizzolo L
Flexural behavior of laminated glass beams with T cross-sections
2014-01-01 Benfratello S; Campione G; Palizzolo L; Scibilia N
Shear strength of High-strength concrete beams: modeling and design recommendations
2014-01-01 Campione, G; Monaco, A; Minafò, G
Approximate Solution on Large Deflection of Glass Panels Subjected to Uniform Pressure
2014-01-01 Campione, G; Minafo, G.; Rondello, V.
Applicability of over-coring technique to loaded RC columns
2014-01-01 campione, g; minafo, g
Effects of shape of transverse cross-section on the load carrying capacity of laminated glass columns
2014-01-01 campione, g; rondello, v
RC column externally strengthened with RC jackets
2014-01-01 Campione, G; Fossetti, M; Giacchino, C; Minafò, G
Effects of circular openings on the compressive behaviour of R.C. columns
2014-01-01 campione, g; cucchiara, c; minafo, g
Strengthening of Solid Brick Masonry Columns with Joints Collared by Steel Wires
2013-01-01 campione, g; granata, f; cucchiara, c
RC Columns Strengthened with Steel Angles and Battens: Experimental Results and Design Procedure
2013-01-01 Campione, G
Flexural and Shear Resistance of Steel Fiber–Reinforced Lightweight Concrete Beams
2013-01-01 Campione, G
Flexural behaviour of glass panels under dead load and uniform lateral pressure
2013-01-01 campione, g; benfratello, s; cucchiara, c; minafo, g
Laminated Glass Members in Compression: Experiments and Modeling
2013-01-01 campione, g.; di paola, m; minafo, g
The use of steel angles for the connection of laminated glass beams: Experiments and modelling
2012-04-01 Campione, G.; Colajanni, S.; Minafo', G.
Comportamento in pressoflessione di pilastri in c.a. rinforzati con la tecnica dell'incamiciatura leggera
2012-01-01 Campione, G; Fossetti, M; Minafò, G; Giacchino, C; Papia, M
INFLUENZA DEL DIAMETRO DEL FORO SUL COMPORTAMENTO IN COMPRESSIONE DI COLONNE IN C.A.
2012-01-01 Campione, G; Macaluso, G; Fazio, R; Minafò,G.
Closure to Experimental Investigation on Compressive Behavior of Bottle-Shaped Struts
2012-01-01 campione,g;minafò,g
Load carrying capacity of RC compressed columns strengthened with steel angles and strips
2012-01-01 campione, g
Flexural behavior of R.C. columns externally wrapped with FRP sheets
2012-01-01 Campione, G.; Minafo, G.; Miraglia, N.; Papia, M.
Strength and ductility of R.C. columns strengthened with steel angles and battens
2012-01-01 campione, g
Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns
2012-01-01 Campione, G.; Fossetti, M.; Minafò, G.; Papia, M.
Behaviour of concrete deep beams with openings and low shear span-to-depth ratio
2012-01-01 campione, g; minafo,g
Flexural Behavior of Steel Fibrous Reinforced Concrete Deep Beams
2012-01-01 Campione, G
The use of pumice lightweight concrete for masonry applications
2012-01-01 Amato, G; Campione, G; Cavaleri, L; Minafo, G; Miraglia, N.
Flexural behaviour of RC columns strengthened with steel angles and strips
2011-01-01 Campione, G; Minafò, G; Papia, M
La pomice per il confezionamento di calcestruzzi leggeri strutturali
2011-01-01 Amato, G; Campione, G; Cavaleri, L; Minafò, G; Papia, M.
INDAGINE SPERIMENTALE SU ELEMENTI IN VETRO STRUTTURALE COMPRESSI
2011-01-01 Campione, G; Minafò, G; Scibilia, N; Aiello, S
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile